Large Mesh Nest

• The nest dimensions are 150 x 100 x 30 mm (l x w x h).
• 5 naturally shaped chambers.
• Tray that holds moisture and humidifies the nest by evaporating water.
• Escape proof mesh.
• Clearview acrylic held down with screws (can be easily removed if needed).
• 10 mm and 15 mm access port for easy connection.
• Heat cable integration inside the tray.

• Small species like Lasius Niger 2000-3000 workers
• Species like Camponotus 1000-2000 workers

House microspecies at your own risk these meshes have been tested for Pheidole but anything smaller is not recommended.

Frequently asked questions:
 

• How often do you hydrate the tray?
  - For high humidity demanding species like Myrmica rubra or Lasius niger we recommend filling the tray every 1 to 3 days. For Camponotus or less demanding species once a week should suffice. 
• How much water do I need to put in?
  -Due to the unique design of this nest you can put in as much water as you want. The nest itself can't overflow so we recommend you hydrate until you can't no more.
• Do you need to put cotton in the bottom tray?
  -We highly recommend adding some form of moisture containing substance into the tray. This can be cotton, sponges, plaster etc. This will greatly improve the moisture holding capacity of the reservoir.
• Which way is the right way to put the tray under the nest?
  -The watering holes should be on the backside of the nest.  The opposite of the tube connector.